- Cast iron double roller crenellated discs
- Wheel Eraser Claws
- Swing rear roller
- Quick opening/closing system by guillotine, without flow change
- Front and rear roller scraper
- Seed flow adjustment
- Stainless steel gravity seeder
-
Out of stock
Seeding machine for tractors This seeding machine was designed to sow most varieties of grass such as pastures, red fescue, ray-grass, etc. on large areas. It is equipped with a gravity seed drill and two cast iron rollers, allowing a single clutch passage. It is used on the ground previously worked with the aid of a soil preparer/stone burier. -
Out of stock
Seeding machine for tractors This seeding machine was designed to sow most varieties of grass such as pastures, red fescue, ray-grass, etc. on large areas. It is equipped with a gravity seed drill and two cast iron rollers, allowing a single clutch passage. It is used on the ground previously worked with the aid of a soil preparer/stone burier.
- Cast iron double roller crenellated discs
- Wheel Eraser Claws
- Swing rear roller
- Quick opening/closing system by guillotine, without flow change
- Front and rear roller scraper
- Seed flow adjustment
- Stainless steel gravity seeder
-
Out of stock
Stone buriers for Skid-Steer (mini- loader) This soil and stone burier is designed for Skid-Steer (mini-loader). There are three versions of the machine hitch:- Toro / Ditch Witch / Vermeer type hitch plate: STH 36
- Bobcat type hitch plate: STH 36 B
- Adaptable to your carrier by your own : supplied without hitch plate, without hoses, without couplers: STH 36 ADAPT
- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Conventional quick hook system
- Grader blade
- Fast coupling / uncoupling device
- Rear mesh roller side adjustment device by cylinder
- TurfRenov® Kit
- Kit control TurfRenov®
- Gravity Grass Seeder : SG 90
-
Out of stock
Stone buriers for Skid-Steer (mini- loader) This soil and stone burier is designed for Skid-Steer (mini-loader). There are two versions of the machine hitch :- Toro / Ditch Witch / Vermeer type hitch plate: STH 42
- Bobcat type hitch plate : STH 42 B
- Adaptable to your carrier by your own : supplied without hitch plate, without hoses, without couplers: STH 42 ADAPT
- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Conventional quick hook system
- Grader blade
- Fast coupling / uncoupling device
- Rear mesh roller side adjustment device by cylinder
- TurfRenov® Kit
- Kit control TurfRenov®
- Gravity Grass Seeder : SG 100
-
Out of stock
Stone burier for tiller This soil preparer and stone burier is thought for cultivators. This machine has been designed to perform tilling to 140 mm, burying pebbles/litter/grass, levelling with adjustable levelling blade, rolling with metal mesh roller. The use is made in direct or on a ground previously decompacted in depth and cleared of large stones.- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Oil bath torque limiter at rotor end
- Working depth adjustment
- Adaptable on: RAPID/REFORM, NIBBI, AGRIA, AEBI (other brands, contact us)
- Storage stand
- Grader blade
- Working depth adjustment by hydraulic jack
-
Out of stock
Stone Burier for Micro-Tractor This soil preparer and stone burier is designed for micro-tractors. It allows the building or renovation of green spaces by preparing the seed bed before seeding. The machine is multi-purpose, it allows tilling, burying (stones, rubbish, herbs, etc.), levelling, mixing and rolling the surface. The use is done live or on a ground previously decompacted in depth and cleared of large stones.- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Oil bath torque limiter at rotor end
- Grader blade
- Rear mesh roller side adjustment device by cylinder
- Stainless Steel Splice Seeder: SMC 100
- Gravity Grass Seeder : SG 100
-
Out of stock
Stone Burier for Micro-Tractor This soil preparer and stone burier is designed for micro-tractors. It allows the building or renovation of green spaces by preparing the seed bed before seeding. The machine is multi-purpose, it allows tilling, burying (stones, rubbish, herbs, etc.), levelling, mixing and rolling the surface. The use is done live or on a ground previously decompacted in depth and cleared of large stones.
- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Oil bath torque limiter at rotor end
- Grader blade
- Rear mesh roller side adjustment device by cylinder
- Stainless Steel Splice Seeder: SMC 90
- Gravity Grass Seeder : SG 90
-
Out of stock
Stone Burier for Micro-Tractor This soil preparer and stone burier is designed for micro-tractors. It allows the building or renovation of green spaces by preparing the seed bed before seeding. The machine is multi-purpose, it allows tilling, burying (stones, rubbish, herbs, etc.), levelling, mixing and rolling the surface. The use is done live or on a ground previously decompacted in depth and cleared of large stones.
- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Oil bath torque limiter at rotor end
- Grader blade
-
Stone burier for remote controlled tool carrierThis soil preparer and stone burier is intended for remote controlled tool carrier. There are two versions of the machine hitch:- MDB type hitch plate: RCH 60 MDB
- Adaptable to your carrier by your own : supplied without hitch plate, without hoses, without couplers: RCH 60 ADAPT
- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Adjustment of the working depth
- Grader blade
- Rear mesh roller side adjustment device by cylinder (Requires auxiliary hydraulic line)
- Gravity Grass Seeder : SG 145
-
Out of stock
Electric assisted seeder The Rotadairon® e.SEEDCAR 750w is an electric assisted seeder which will allow you to comfortably turf your land and preserve the environment The machine is fitted with a quiet electric motor and its battery has an autonomy of 60-90 min, allowing for about 2500 m² per cycle. The metal mesh roller, at the front, wafts the soil. Then the seed drill deposits the seeds. Finally the smooth rear roller, ideally compacts the soil to obtain a good germination and avoid the marking of the steps of the user.- Seed level indicator
- Seed flow adjustment
- Seed Depot Calibration Auger
- Quick adjustment of handlebar height
- Battery
- Stainless steel gravity drill
- Advancement trigger
- Quick release guillotine system without flow change
- Extra battery
- Seed dibbler
- Additional masses : 14 Kg (30.8 lb)
-
Out of stock
Dethatcher for tractor The DS Dethatchers Spikers are the evolution of our proven «ED» models well known for their superior dethatching qualities with their unique blade fixing system, accepting 3 variants of knives to precisely meet your needs. This Rotadairon® DS 130 dethatching machine allows to perform dethatching or scarifying operations at the desired depth (from 0 to 60 mm). In addition to these operations, the machine allows to carry out an aeration of the ground (spiking effect, without power take-off) or a rolling. The machine is equipped with a quick-change blade system (Rotadairon® patent). The blades are positioned magnetically on their support. All the supports are locked by a single nut at the end of the rotor axis. The DS offer is flexible, with a basic machine and two additional options: - Basic version including a single front roller - A first option: additional rear roller for more precision - A second «SWING» option to allow optimum flexibility on hilly terrain.- 3 knife configurations:
- Sharpened (standard): Stainless steel knife sharpened for classic de-thatching
- Not sharpened: Made of stainless steel knives not sharpened for more aggressive de-thatching
- Carbide plate: Carbon steel with carbide plate for very aggressive de-thatching
- Magnetic knife positioning (quick change)
- Unique nut at the end of the rotor shaft
- Option n°1 : Rear roller
- Option n°2 : « SWING » (Option 1 required)
- 3 knife configurations:
-
Out of stock
Dethatcher for tractor The DS Dethatchers Spikers are the evolution of our proven «ED» models well known for their superior dethatching qualities with their unique blade fixing system, accepting 3 variants of knives to precisely meet your needs. This Rotadairon® DS 180 dethatching machine allows to perform dethatching or scarifying operations at the desired depth (from 0 to 60 mm). In addition to these operations, the machine allows to carry out an aeration of the ground (spiking effect, without power take-off) or a rolling. The machine is equipped with a quick-change blade system (Rotadairon® patent). The blades are positioned magnetically on their support. All the supports are locked by a single nut at the end of the rotor axis. The DS offer is flexible, with a basic machine and two additional options: - Basic version including a single front roller - A first option: additional rear roller for more precision - A second «SWING» option to allow optimum flexibility on hilly terrain.- 3 knife configurations:
- Sharpened (standard): Stainless steel knife sharpened for classic de-thatching
- Not sharpened: Made of stainless steel knives not sharpened for more aggressive de-thatching
- Carbide plate: Carbon steel with carbide plate for very aggressive de-thatching
- Magnetic knife positioning (quick change)
- Unique nut at the end of the rotor shaft
- Option n°1 : Rear roller
- Option n°2 : « SWING » (Option 1 required)
- 3 knife configurations: