- Remote control with magnetic base
- Sweeping speed control
- Adjustable trimming teeth
-
Out of stock
Stump grinder for Skid-steer (mini-loader) This Stump grinder has been designed to grind , trim and crush most species of tree stumps. Equipped with a unique system to keep a precise control on sweeping speed, to then adapt its work to the type of stump to be treated. The sweeping control is magnetically attached to the carrier for greater comfort. Trimmer teeth can be repositioned for longer working life ! -
Out of stock
Stone burier for Tractor This soil preparer and stone burier is designed for tractors. It allows the building or renovation of green spaces by preparing the seed bed before seeding. The machine is multi-purpose, it allows tilling, burying (stones, rubbish, herbs, etc.), levelling, mixing and rolling the surface. The use is done live or on a ground previously decompacted in depth.- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Torque limiter with dry friction and flywheel
- Working depth adjustment
- Grader blade
- Rear mesh roller side adjustment device by cylinder
- Roller cast iron notched discs + scraper
- Stainless steel splice seeder: SMC 150
- Gravity Grass Seeder : SG 150
-
Out of stock
Seeding machine for tractors This seeding machine was designed to sow most varieties of grass such as pastures, fescue, ray-grass, etc. on large areas. It is equipped with a gravity seed drill and two cast iron rollers, allowing a single clutch passage. It is used on the ground previously worked with the aid of a soil preparer/stone burier. Its particularity is that its transport width is 3 meters (118’’ 1/8).- Seed flow adjustment
- Seed Depot Calibration Auger
- Front and rear roller scraper
- Stainless steel gravity seeder
- Swing rear roller
- Quick opening / closing at the cockpit
- Wheel Eraser Claws
-
Out of stock
Stone burier for Hydraulic Loaders This soil preparer and stone burier is intended for hydraulic loaders with Bobcat hitch plate. It allows the building or renovation of green spaces by preparing the seed bed before seeding. The machine is multi-purpose, it allows tilling, burying (stones, rubbish, herbs, etc.), levelling, mixing and rolling the surface. The use is made in direct or on a ground previously decompacted in depth and cleared of large stones.- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Conventional quick coupler system
- Working depth adjustment
- Grader blade
- Spiral roller
- Roller side adjustment device by cylinder
-
Out of stock
Dethatcher for tractor The DS Dethatchers Spikers are the evolution of our proven «ED» models well known for their superior dethatching qualities with their unique blade fixing system, accepting 3 variants of knives to precisely meet your needs. This Rotadairon® DS 180 dethatching machine allows to perform dethatching or scarifying operations at the desired depth (from 0 to 60 mm). In addition to these operations, the machine allows to carry out an aeration of the ground (spiking effect, without power take-off) or a rolling. The machine is equipped with a quick-change blade system (Rotadairon® patent). The blades are positioned magnetically on their support. All the supports are locked by a single nut at the end of the rotor axis. The DS offer is flexible, with a basic machine and two additional options: - Basic version including a single front roller - A first option: additional rear roller for more precision - A second «SWING» option to allow optimum flexibility on hilly terrain.- 3 knife configurations:
- Sharpened (standard): Stainless steel knife sharpened for classic de-thatching
- Not sharpened: Made of stainless steel knives not sharpened for more aggressive de-thatching
- Carbide plate: Carbon steel with carbide plate for very aggressive de-thatching
- Magnetic knife positioning (quick change)
- Unique nut at the end of the rotor shaft
- Option n°1 : Rear roller
- Option n°2 : « SWING » (Option 1 required)
- 3 knife configurations:
-
Out of stock
Dethatcher for tractor The DS Dethatchers Spikers are the evolution of our proven «ED» models well known for their superior dethatching qualities with their unique blade fixing system, accepting 3 variants of knives to precisely meet your needs. This Rotadairon® DS 130 dethatching machine allows to perform dethatching or scarifying operations at the desired depth (from 0 to 60 mm). In addition to these operations, the machine allows to carry out an aeration of the ground (spiking effect, without power take-off) or a rolling. The machine is equipped with a quick-change blade system (Rotadairon® patent). The blades are positioned magnetically on their support. All the supports are locked by a single nut at the end of the rotor axis. The DS offer is flexible, with a basic machine and two additional options: - Basic version including a single front roller - A first option: additional rear roller for more precision - A second «SWING» option to allow optimum flexibility on hilly terrain.- 3 knife configurations:
- Sharpened (standard): Stainless steel knife sharpened for classic de-thatching
- Not sharpened: Made of stainless steel knives not sharpened for more aggressive de-thatching
- Carbide plate: Carbon steel with carbide plate for very aggressive de-thatching
- Magnetic knife positioning (quick change)
- Unique nut at the end of the rotor shaft
- Option n°1 : Rear roller
- Option n°2 : « SWING » (Option 1 required)
- 3 knife configurations:
-
Out of stock
SEEDCAR-UKSEEDCAR ROTADAIRON
Manual Seeding Machine The Rotadairon® SEEDCAR is a manual seeding machine designed for seeding all types of grass (bluegrass, red fescue or ray-grass). This gravity seeder is equipped with a graduated sector flow adjustment. For working comfort, the opening/ closing of the seeding is done from the handlebars. It also makes it possible to gear up and roll up all the «corners» of narrow or difficult access grounds. The metal mesh roller, at the front, wafts the soil. Then the seed drill deposits the seeds. Finally the smooth rear roller, ideally compacts the soil to obtain a good germination and avoid the marking of the steps of the user.- Seed level indicator
- Seed flow adjustment
- Seed Depot Calibration Auger
- Quick adjustment of handlebar height
- Stainless steel gravity seeder
- Quick release guillotine system without flow change
- Seed dibbler
- Additional masses : 14 Kg (30.8 lb)
-
SEEDCARSEEDCAR ROTADAIRON
Engazonneur manuel Le Rotadairon® SEEDCAR est un engazonneur manuel conçu pour le semis de tous les types de gazon (pâturins, fétuques ou ray-grass). Ce semoir par gravité est équipé d’un réglage de débit par secteur gradué. Pour un confort de travail, l’ouverture / fermeture du semis se fait depuis le guidon. Il permet aussi d’engazonner et rouler tous les «coins» de terrains, étroits ou d’accès difficiles. Le rouleau métal déployé, à l’avant, gaufre le sol. Ensuite le semoir dépose les graines. Enfin le rouleau arrière lisse, compacte idéalement le sol pour obtenir une bonne germination et éviter le marquage des pas de l’utilisateur.- Indicateur du niveau de semences
- Réglage du débit de semences
- Auget pour étalonnage du débit de semences
- Réglage rapide de la hauteur du guidon
- Semoir inox par gravité
- Système d’ouverture / fermeture rapide par guillotine, sans modification de débit
- Kit hérisson
- Masses additionnelles : 14 Kg (30.8 lb)
-
Out of stock
Electric assisted seeder The Rotadairon® e.SEEDCAR 750w is an electric assisted seeder which will allow you to comfortably turf your land and preserve the environment The machine is fitted with a quiet electric motor and its battery has an autonomy of 60-90 min, allowing for about 2500 m² per cycle. The metal mesh roller, at the front, wafts the soil. Then the seed drill deposits the seeds. Finally the smooth rear roller, ideally compacts the soil to obtain a good germination and avoid the marking of the steps of the user.- Seed level indicator
- Seed flow adjustment
- Seed Depot Calibration Auger
- Quick adjustment of handlebar height
- Battery
- Stainless steel gravity drill
- Advancement trigger
- Quick release guillotine system without flow change
- Extra battery
- Seed dibbler
- Additional masses : 14 Kg (30.8 lb)
-
Stone burier for remote controlled tool carrierThis soil preparer and stone burier is intended for remote controlled tool carrier. There are two versions of the machine hitch:- MDB type hitch plate: RCH 60 MDB
- Adaptable to your carrier by your own : supplied without hitch plate, without hoses, without couplers: RCH 60 ADAPT
- Oversized rotor
- Anti-pad blades (Rotadairon® patent)
- Selection grid fingers
- Adjustment of the working depth
- Grader blade
- Rear mesh roller side adjustment device by cylinder (Requires auxiliary hydraulic line)
- Gravity Grass Seeder : SG 145
-
Out of stock
Mulcher for Skid-steer (mini-loader) and hydraulic loader This mulcher is designed for Skid-Steer(mini-loader). There are two versions of the machine hitch :- Toro / Ditch Witch / Vermeer type hitch plate : BRD 50 - BRD 50 E
- Bobcat type hitch plate : BRD 50 B
- Safety hydraulic block
- Cartridge filtration
- Y-shaped mounting of knives on shackles
- Roller adjustment for working height
- Floating field following system
- Rear splash guard
- Forward push bar
-
Out of stock
Dethatcher/collector for Tractor This dethatching / collecting machine allows to carry out the dethatching operations of a green in one pass. The machine has a patented sweeping system with hydraulic drive. The hydraulically discharged collection container, with a capacity of 180 liters, allows for the clearing of a whole green. In addition to these operations, the machine can also be used to aerate the ground (spiking effect, without power take-off) or to roll. The machine is equipped with a quick-change blade system (Rotadairon® patent). The blades are positioned magnetically on their support. All the supports are locked by a single nut at the end of the rotor axis.- 3 knife configurations:
- Sharpened (standard): Stainless steel knife sharpened for classic de-thatching
- Not sharpened: Made of stainless steel knives not sharpened for more aggressive de-thatching
- Carbide plate: Carbon steel with carbide plate for very aggressive de-thatching
- Magnetic knife positioning (quick change)
- Unique nut at the end of the rotor shaft
- Floating 3rd point hitch for better ground following.
- Hydraulic system (Cylinders) for unloading the tank
- Hydraulic system (Motor) for perfect felt collection
- Rear roller frame for use without a pickup bin
- 3 knife configurations: